Contact Sales
Home / Use Cases / Next-Gen Wi-Fi / New Wi-Fi, same old performance
Use case · Next-Gen Wi-Fi

Get real value from Wi-Fi 6E and Wi-Fi 7.

New access points don't help if most devices can't use the new band, or if power and cabling hold them back. We plan the upgrade around what you have and what you'll add.

TYPICAL SPACEOffices, schools, clinics
WHAT HURTSUpgrade without the payoff
WHAT WE CHANGEAn upgrade planned around your devices
Sound familiar?

What it looks like day to day.

A typical scenario based on the environments we work in, not a specific customer.

  • You upgraded access points but most devices still connect the old way
  • Speeds didn't improve where it matters
  • Older security settings keep devices off the new band
  • Switches can't power the new access points, or uplinks are too slow
Everyone crowded on 5 GHz compared with Capable devices on clean 6 GHzNetwork segmentation. Existing: Laptops, Phones, Video, Older devices share 5 GHz, 80 MHz · CONGESTED. Proposed: 6 GHz (160 MHz · WPA3); 5 GHz (LEGACY CLIENTS).AEXISTING CONDITIONSNTSLAPTOPSPHONESVIDEOOLDER DEVICESAP5 GHz80 MHz · CONGESTEDNO SEGMENTATIONEXISTING · 1 SEGMENTBPROPOSED DESIGNNTSLAPTOPSPHONESVIDEOOLDER DEVICESAP6 GHz160 MHz · WPA35 GHzLEGACY CLIENTSPROPOSED · 2 SEGMENTSA — Everyone crowded on 5 GHzB — Capable devices on clean 6 GHz
Sheet A shows existing conditions; sheet B shows the proposed design. Illustrative, not to scale.
Why it happens

The new band only helps devices that can use it.

6 GHz adds clean, uncrowded airspace, but only newer devices can use it, and it needs modern security plus enough power and uplink behind each access point. Without a plan, you pay for the new platform and keep the old experience.

What we do

How we fix it.

Wi-Fi is the network your people and devices use inside your buildings. The fix is usually design: where access points go, how many, and what sits behind them.

  1. Inventory your devices

    How many can use 6 GHz today, and what's coming in the next refresh.

  2. Plan all three bands

    Keep older devices working while moving capable ones to the cleaner band.

  3. Check power and uplinks

    Switches, power budgets and cabling ready for the new access points.

  4. Roll out in phases

    Upgrade where it pays off first, and validate when the project calls for it.

Most designs start from your floor plans and a predictive heatmap. We add an onsite survey when the building calls for it.

What changes

What's different after.

Faster where it counts

Capable devices move to uncrowded spectrum.

No install-day surprises

Power and cabling gaps found early.

A clear roadmap

Upgrade timing tied to your device refresh.

Is it a fit?

Where this works, and where something else fits better.

We recommend what solves the problem, even when it's a different solution.

A good fit for

  • Organizations with an access point refresh coming up
  • Busy spaces full of newer laptops and phones
  • Video-heavy offices and classrooms

Something else may fit better

  • Sites where most devices are older and won't be replaced soon: tuning the current network may be the better spend
For your IT or engineering team

Technical detail

The design decisions, the end-to-end path and how the result is tested.

Show

The migration target is not every client. It is the client and application population that can use 6 GHz or Wi-Fi 7 capability in a measured environment.

Design decisions

Design decisionWhat we need to understand
Client readinessInventory radio generation, supported bands, security, drivers, operating systems, regulatory domain, and application demand.
Spectrum planChoose channel width and reuse by environment; wide channels are a design option, not a default setting.
Infrastructure readinessVerify cabling, PoE, multigig ports, uplinks, controller or cloud support, identity, and observability.

The end-to-end path

  1. CLIENT ESTATELegacy · 6 GHz · Wi-Fi 7Capability by device class
  2. SPECTRUM PLAN2.4 · 5 · 6 GHzCoverage, capacity, width, and reuse
  3. ACCESS EDGEAP power · multigigCabling, switching, and uplinks
  4. APPLICATIONCollaboration · transfer · cloudMeasured experience, not link rate

Features such as wider channels or multi-link operation depend on client support, configuration, available spectrum, and implementation. They should be validated, not assumed.

How the result is tested

  • Capability test Verify every major client class, driver, band, security method, and negotiated feature.
  • Band-choice test Observe where capable clients actually associate and why.
  • Mixed-client test Run legacy, 6 GHz, and Wi-Fi 7 clients together under representative demand.
  • Spectrum test Measure utilization, retries, channel reuse, and performance at the chosen widths.
  • Wired-edge test Confirm PoE, cable, switch rate, uplink, controller, firewall, and WAN headroom.
  • Application test Compare latency, throughput, stability, and user workflow—not only PHY or link rate.
Related situations

You might also be dealing with.

All use cases →
Wi-FiCase WF-03

Wi-Fi works until the room fills up

Design for the moment everyone connects at once: class start, shift change, showtime.

Education & campuses · Venues & hospitality · Offices & real estateSee how it's solved Wi-FiCase WF-01

Every desk move turns into a cabling project

Make Wi-Fi the normal way people connect, so rooms and teams can change without new cable runs.

Offices & real estate · Education & campusesSee how it's solved Wi-FiCase WF-04

One shared Wi-Fi password for everyone and everything

Give staff, guests, personal phones and connected devices their own safe way on.

Healthcare · Offices & real estate · Retail & branches · Education & campusesSee how it's solved

Next Wi-Fi use case: Wi-Fi stops at the building door → · About Next-Gen Wi-Fi →

Practical next step

Tell us where the Wi-Fi lets you down.

Share what's happening and where. We'll recommend the right fix and the next step, starting from your floor plans or site details.

Start your project