Just the verification
We measure coverage, speed, roaming, calls or failover where it matters, with the devices your people use, and tell you plainly what passes and what doesn't.
Yours to keepA test record and a list of what to fix.
Step 04: Verify
What happensTesting against what was agreed
What you getA test record and as-built drawings
What you prepareSite access and a few real devices
What happens
Tested where it matters, not just where it's easy.
A quick signal check near the front door says nothing about the loading dock at shift change or the conference room during an all-hands.
Verification goes back to the success measures agreed at the start. We test at the locations that matter, with the devices your people actually use, doing the things they actually do. Anything that falls short is fixed and retested. The level of testing matches the project, from a focused walk-through to a full measured survey.
- Real devices
- Real tasks
- Fix and retest
- As-built record
One step or all five
An independent check of a network you already have.
Verification doesn't have to follow our install. If you're not sure a network does what you paid for, we can test it.
As part of all five
When the project calls for it, we test against the success measures written down at the start, fix what falls short and retest before we call it done.
Carries intoManage →
Where it goes wrong
What “it's installed” often hides.
Tested in the wrong places
The easy spots get tested. The stairwell, basement or far corner of the yard don't.
What we do insteadWe test at the locations named in the requirements.
Tested with the wrong devices
A laptop connects fine. The handheld scanners and older phones don't.
What we do insteadWe test with the devices your people use every day.
No record of what's there
Six months later, nobody knows what was installed, where, or how it was set up.
What we do insteadYou get as-built drawings and settings, not just an invoice.
Our approach
How verification works.
Plan the test
Pull the success measures and test plan from design, or write them with you.
Measure
Coverage, speed, roaming, calls or failover, depending on the project.
Fix and retest
Adjust anything that falls short and measure it again.
Document
Test results, as-built drawings and final settings, handed to you.
Getting ready
What we prepare, and what you do.
01
A test plan
Built from what the network is supposed to do.
02
Tools and test devices
The right instruments, plus the kinds of devices your people use.
03
A punch list
Every issue found, what was done and the retest result.
04
As-built drawings and settings
A record your team or ours can support from.
What you get
What you walk away with.
Yours to keep, whether we do the next step or someone else does.
| You keep | What it is |
|---|---|
| Test record | What we measured, where, and the results against the target. |
| Punch list, closed | Every issue found, what we did and the retest result. |
| As-built drawings | What was installed and exactly where. |
| Final settings | Configuration records your team or ours can support from. |
Practical next step
Tell us which step you need.
One step or all five. Share the sites, the problem and the timing, and we pick up from there.